Characteristics of cement color tile forming machine

- Jun 01, 2018-

1. Rapid molding speed and large output, PLC programmable controller is adopted, automatic control and man-machine interface are adopted.

Performance is more reliable. Easy to operate. Non-burning color tile machine

Full hydraulic pneumatic, production speed up to 8 pieces/min, high yield, high cost performance.

2. Mortar concrete is formed by pressure filtration moulding. The product structure is perfect.

Accurate size, can meet the needs of all kinds of buildings, is the quality of concrete products.

3. Multiple functions in one machine. The machine can produce all kinds of main tiles, side tiles, drain tiles, etc

To produce all kinds of high - grade color floor tile, such as terrazzo stone brick, polished shot blasting floor tile, washed floor tile, etc.

4. Non-burning color tile machine, high quality and low price, with almost perfect products to gain market share.

Cement color tile color light sample, bright, smooth, complete, no warp, no crack, a very good market. The details are as follows:

1. Best waterproof performance

The structure at the bottom of the tile can only be achieved by the high-quality tiles formed by pressure filtration moulding, which makes the rain water flow more smoothly and quickly, avoiding the phenomenon of water countercurrent of common cement tiles formed by rolling pressure. In addition, the moulded tile has a higher head than part of the water blocking effect, which is used in the horizontal roof, also will not appear rainwater countercurrent phenomenon.

2. The highest anti-pressure performance (the model is accurate and can be designed according to requirements)

After moulding, the strength is high (1,250 kn pressure), and the shape size is accurate (420mm * 330mm, about 9 pieces per square). More than 200 kilograms of flexural strength is enough to allow builders to walk freely on the paved roof.

3. The most convenient construction performance

Both vertical and horizontal laying are convenient and feasible. In general slope roofing, you can do not need to hang tiles, and can also easily cut tiles by wet cutting at any Angle with a cutter.

4. The wind resistance is the strongest

The moulded tiles are used to bite the inclined surface and slope from left to right to make the roof form a compact whole.

5. Best heat insulation performance

By the Japanese joint tests show that the solar energy research center in the hottest within three months, with moulded article color tile use tile table inside the roof of the daily average temperature of 71.4 degrees Fahrenheit (21.89 ℃), reduce the load of the air-conditioning, thermal performance is better than that of other kind.

6. Super antifreeze performance

Through 25 cycles of freeze-thaw tests, the performance of color tiles against freeze-thaw reached the JIS standard in Japan, far superior to other types of tiles.

7. Perfect anti-permeability performance

Because the color tile adopts the large tonnage press molding, the area use, will not appear seepage water phenomenon. High compactness and low water absorption rate, its anti-permeability performance is much higher than that of other tile species, and no water seepage will occur in the area of long-term rain and snow.