Characteristics of cement colored tiles produced by molded colored tile machines

- Apr 01, 2021-

Characteristics of cement colored tiles produced by molded colored tile machines

1. Unique waterproof structure

The valley bottom structure, which can only be achieved by the high-quality tiles of the filter press molding, makes the rainwater flow out more smoothly and quickly, and avoids the phenomenon of rainwater backflow of the rolled-formed ordinary cement tiles. In addition, the molded tile [1] only has the function of retaining the water above the head part, even if it is used on a horizontal roof, there will be no rainwater backflow phenomenon.

2. Super high strength

After compression molding, it has high strength (1250 knewton pressure) and appearance size. (425mm×337mm, about 9 pieces per square). The density is uniform. The flexural strength of more than 200 kilograms is enough to allow construction workers to walk freely on the already laid roof.

3. Convenient construction

Whether it is vertical laying or horizontal laying construction is convenient and feasible. On general sloping roofs, it is not necessary to hang the tiles, and it is convenient to use a cutting machine to cut the tiles at any angle in a wet method.

4. Super wind resistance

The molded colored tiles adopt the upper, lower, left, and right occluding slopes and slopes to make the roof form a tight whole.

5. Good heat insulation performance

A joint test conducted by the Japan Solar Energy Research Center shows that the average daily temperature of the inner surface of the roof built with molded color tiles and hanging tiles is 71.4 degrees Fahrenheit (21.89 degrees Celsius) within three months of heat, which greatly reduces the load and thermal performance of the air conditioner. Better than other tiles.

6. Resistance to freezing and thawing

After 25 cycles of freezing and thawing tests, it is shown that the anti-freezing and thawing performance of colored tiles has reached the Japanese JIS standard, which is far better than other types of tiles.

7. Penetration resistance

Since the colored tiles are molded by a large-tonnage press, there will be no water seepage phenomenon when used in regions. The density is large, the water absorption rate is low, and its anti-permeability performance is much higher than other tile types. It will not see water when used in long-term rain and snow areas.

8. Low cost and high profit.

The cost is about 1.2 yuan/piece. (Including labor, raw materials, taxes, depreciation, consumption, etc.), the price of cement colored tiles is 2-3 yuan, and the selling price varies slightly in different regions.