How to overhaul brick machine equipment
With the development of mechanical brick and tile equipment, the requirements for brick machine equipment are getting higher and higher, and the use of brick machine equipment needs to be strengthened. How to repair the hollow brick machine?
⒈When installing or replacing new and old molds, be sure to avoid collisions and bumps, assemble in a civilized manner, and pay attention to protecting the molds;
⒉Check the size of the mold and the condition of the welding joint frequently during use. If weld cracks occur, they should be repaired in time. If the wear is too fast, adjust the aggregate size, and excessive wear will affect the quality of the product and require a new mold;
⒊ Carefully adjust the gap, including the distance between the indenter and the mold core, the indenter and the moving plane of the material cart, the mold frame and the wire board, and the relative movement must not interfere or rub against;
⒋When cleaning molds daily, use air compressors and soft tools to remove concrete residues. Gravity beating and prying molds are strictly prohibited;
⒌The replaced mold should be cleaned and oiled to prevent rust. It should be placed flat on a dry and flat support pad to prevent gravity deformation.