Knowledge of pallet in the production of cement block machine
In the production of cement block machine equipment, in addition to the mobile type does not require a pallet, the fixed type also requires a pallet. At present, most of the pallets used in the block machine are made of wood, and there are also products pressed by sawdust, but no matter it is The pallet of any material must have a uniform thickness. Only in this way can the height of the produced cement bricks be the same, and the surface of all the bricks must be flat, and there should be no unevenness or unevenness. But this kind of pallet does not have a long life, if it is well maintained, it can be used for a little more than a year.
In order to improve the life of the block machine pallet products, there is a new type of pallet made of pine wood and steel bars on the market. Although this one-time investment is relatively large, the service life is three times that of ordinary pallets. And after use, the steel bars can be recycled and reused, which is also a good type of pallet.
Plastic pallets are also a kind of pallets that are widely used nowadays. Machine-made, the thickness and width of each brick board are the same, relatively uniform, and each brick board has a long life span and can be used continuously for more than five years. Moreover, this kind of brick board can be recycled and reused. Overall, the investment of a board is only slightly more expensive than a wooden board, which is a relatively cost-effective investment.