Pay attention to the maintenance of cement brick machine in summer
In the hot summer, the outdoor temperature can be as high as 40 degrees, which undoubtedly brings a lot of inconvenience to the citizens’ daily work, especially the brick factory, which has normal production in summer. How to ensure the normal work of the cement brick factory in summer, first of all It is necessary to do a good job of cooling the cement brick machine equipment. The original high temperature and the high temperature caused by the rolling of the machine, if the temperature is not cooled in time, the output of the cement brick factory will be lost. So how to do a good job of cooling down?
To provide you with the following suggestions, I hope to help friends who run a brick factory. First of all, the motor in the automatic hydraulic machine equipment has been in uninterrupted working conditions for a long time. High-speed rotation will make the temperature of the motor higher and higher. The user of the hydraulic brick machine can use the blower to lower the temperature of the automatic hydraulic brick machine to ensure that the hydraulic brick machine works It is often in low temperature conditions. Secondly, the most important thing is the recommended machine. Check the oil and dust on the recommended machine to prevent the excessive pressure of the recommended machine or other details that cause poor heat dissipation. After all, it is the local area where the oil leaks on the automatic hydraulic brick machine equipment should be checked frequently, especially the fuel, and it is necessary to compensate in time.
Other parts should be protected, repaired and replaced. When the hydraulic brick machine is not in use, try not to expose it to high temperatures. Putting it in a cool place may be a certain method to ensure the integrity of the equipment at high temperature.