Selection and storage of clay tile machine raw materials
In order to ensure the continuity of the clay tile machine production and the stability of the raw material performance, according to the raw material meteorite and the supply situation and the requirements of the production process, the clay tile manufacturer must have a certain amount of raw material storage. The change of the material location of the clay tile machine and the change of the raw material ore layer will cause the raw material performance to be unstable. This requires attention to the pre-homogenization process of the raw material in the storage of raw materials, that is, the raw materials transported back in different ore layers or different batches are piled The yard or raw material shed is laid in horizontal layers, and when used, the material is taken vertically. This pre-homogenization process can be implemented with a loader or conveyor operation. It would be more advantageous if the mine site and transit transportation site can be used for multiple pre-homogenization. In principle, the raw materials are stored in the material shed, so that the natural moisture content of the raw materials can be controlled. In wet and rainy areas, appropriate consideration should be given to increasing the area of the raw material shed. It is especially important for equipment with strict requirements.
When coal gangue, shale and other raw materials contain impurities and stones, it will not only affect the crushing effect of the raw materials, but also affect the product quality of the tiles. Therefore, manual selection or addition of stone removal and purification equipment should be considered during the processing of raw materials to remove impurities or stones. When the raw material contains a small amount of impurities and has little effect on the quality of the product, you can also consider strengthening the crushing, and use the raw material after crushing the impurities