The hazards of overheating of hydraulic oil of cement block machine
The hydraulic pump station of the hydraulic system is the main carrier. The hydraulic oil inside plays a vital role in the entire system. If overheated, it will destroy the oil film of the valve bodies and friction parts of the pump station, which will make Increased friction speeds up damage and reduces the use time of hydraulic components.
When the hydraulic oil is overheated, it will also cause generalization, which will form a gelatinous substance. This substance will enter the pipes and valves with the hydraulic system, and then block some small vents of the components. Cause the hydraulic components to malfunction or directly jam and cause production interruption.
Because of the different materials of the valve parts used in the hydraulic system by the manufacturers of various block and brick machines, there are some obvious quality gaps. If the hydraulic oil is overheated, it will cause some poor quality valves and components due to heat. The swelling, which forms a blocking point and causes the system to stop.