Daily maintenance of block machine:
1. Before each operation, please check the circuits and switches of each part to ensure that the connectors, switch contacts and ground are good. The core wire is not exposed; the rubber of the cable outer tube should not be damaged, and the insulation is reliable. A kind
2. Regularly check the damping components, such as springs (seats), rubber tubes, rubber pads, adjusting nuts and other parts. At the same time, you need to check whether the parts connected by bolts (stripes) are tight. When tightening parts, force should be uniform to avoid damaging the parts. If there are damaged parts, they should be replaced in time to ensure that the parts are reliably connected, and a trial run should be performed to check whether they are normal. A kind
3. Adhesive materials on the machine should be removed frequently, and the machine parts should be protected from the sun and rain. At the same time, the temperature change of the vibration motor and its related bearings must be checked during operation. Usually, it should be controlled within the allowable temperature range (about 60 ° C).