Features of color tile production by cement tile machine
1.Unique waterproof structure
The bottom structure of the tile valley, which can only be achieved by the high-quality tiles of the full-automatic cement tile machine, makes the outflow of rainwater smoother and faster, and avoids the phenomenon of rainwater counterflow of the ordinary cement tile formed by rolling. In addition, the water-retaining effect of the upper part of the head, which is only formed by compression molding, does not cause the phenomenon of rainwater backflow even when it is used on a horizontal roof.
2.Super high strength
The fine color tiles are made by upper and lower die-molding, with beautiful and vivid appearance, smooth and flat tile surface, strict and accurate dimensions, and uniform density. The flexural strength of more than 200 kg is enough to allow construction workers to walk freely on the already-laid roof.
Whether it is vertical laying or horizontal construction is convenient and feasible. On general sloping roofs, there is no need to hang tiles, and it is convenient to use a cutting machine to cut tiles at any angle by wet method.
4.Super wind resistance
The moulded color tiles use the upper and lower left and right to engage the inclined surface and slope to make the roof a tight whole.
Because the colored tiles are molded by a large tonnage press, the compactness is large, and the water absorption rate is low. Its anti-permeability is much higher than other tile types. If it is used in long-term rain and snow areas, water seepage will not occur.