How To Avoid Injury When Using Tile Press Machine?

- Jun 15, 2020-

How to avoid injury when using tile press machine?


When adjusting the tile press equipment, it is necessary to cut off the power. When moving the workpiece, you should pay attention to the safety of the hand, manually place the blank, and take the blank. Working procedures: Before the equipment is used, check whether the connections are secure and whether the mounting bolts and nuts are tightened. Sufficient lubricating oil should be added to the left and right chassis to start the machine for power-on and test drive. Carefully observe the operation of the empty car first, whether there is vibration, noise, whether oil is coming from the oil window, and whether the movement of each part is coordinated. The mold can only be installed after it is normal. When installing the mold, you need to cut off the power. Manually move the motor belt or large gear to index the table. And make the slider rise to a higher point, so that an object can be supported between the worktable and the bottom surface of the slider, so that the anti-skid seat naturally falls, causing an accident.


The mold used in this machine needs an upper mold and six lower molds of the same size. First install the upper mold and a lower mold. The lower mold is directly installed on the hexagonal runner table, and the upper mold is installed on the bottom surface of the slide. And place a pad of appropriate thickness to ensure that after the upper and lower molds are closed, the four peripheral gaps are uniform, and the distance between the upper and lower molds is equal to the thickness of the required tile blank. Then, based on the upper mold, the table is indexed, and the remaining five lower molds are installed. After all the upper and lower molds are installed, the tile can be driven to drive, automatically unload, and take the blank. Working procedures: mold installation and host test run are the same as above, and then open Air compressors, vacuum pumps, extruders, tile cutting machines, unwinding machines, tile pressing machines, host machines and tile conveyors. When stopping, first stop the extruder, then stop the rest of the equipment.


If it is found that the equipment is not operating normally during use, immediately cut off the power and stop the search, and adjust the blade gap according to the thickness of the material being cut. Follow-up survey of customer needs, timely grasp customer development needs. And the industry trends involved in it, to meet the needs of customers, which will also become a huge driving force for development between enterprises.


1. The high-number pulse input function should be used for the tile pressing machine. The high-number input performance is excellent, the AB phase has strong anti-interference ability, and the fixed value interrupt function is used to ensure accuracy.


2. The detection part of the tile pressing machine includes: pulse encoder for detecting the length of the color steel tile, the up and down stroke switch of the profile, the up and down stroke switch of the cutter, the up and down operation button of the profile, the up and down stroke button of the cutter, and the emergency stop switch , Hydraulic start-stop switch, etc.


3. The executive part of the tile pressing machine has a frequency converter drive motor, a hydraulic station motor, two hydraulic solenoid valves for the press type, and two hydraulic solenoid valves for the cutter.


4. The PLC has 14 inputs/10 relay outputs, which just meet the input and output requirements, and is equipped with KDN text screen, which can complete parameter setting, alarm display, help information, production data display and so on.


This machine tool is suitable for all kinds of steel plates, copper plates, aluminum plates and non-metallic material plates whose shear material thickness is the rated value of the machine tool, and the material needs to be free of hard marks, welding slag, slag inclusions, and welding seams. All parts should be constantly connected and lubricated. The operator should fill the lubricant once every shift. The mechanic should fill the rotating bearing once every six months. The upper blade of the shear is fixed on the knife holder, and the lower blade is fixed on the work. On the table, the supporting ball is installed on the working table, so that the sheet is not scratched when sliding on the top, the pressing cylinder is used to press the sheet to prevent the sheet from moving when shearing, and the guardrail is safely assembled To prevent work-related injuries.