Multi-functional Block Making Machine

- Mar 27, 2020-

The pluripotent block has the following advantages in practice:

1. Wide source of raw materials, the use of waste is environmentally friendly without damaging the land, and the cost of raw materials is low:

The raw materials of multi-energy blocks are abundant industrial slags such as steel slag, coal gangue, and fly ash, or a mixture of conventional stones and cement. There are no additives that affect the product quality and produce harmful gases. Protect the land without clay. Low raw material costs. Therefore, the raw materials are better than clay bricks and existing blocks.

2. Simple and fast production, no burning, no factory building, low production cost:

The production of multi-energy blocks is simple and fast, and it can be produced smoothly by reforming on the existing block forming machine, and its output is equivalent to that of the original block forming machine. No burning, routine maintenance. The production site can be used with or without plant. The specifications of the multi-energy block are larger than the existing blocks, which is beneficial to production management and low production costs. Therefore, the production is better than clay bricks and existing blocks.

3. Simple design, standardization and low design cost:

The building and structure design of the multi-energy block is simple and conforms to the current design code. There is no need to consider the special layout of the block and the problem of rebuilding bricks or other components. That is, the multi-energy block can be used to build a perfect building. The wall is well connected to the roof foundation of the floor. Seismic columns, ring beams, beams, beam pads, etc. are arbitrarily set in position and number. These components are not exposed to affect aesthetics, and there is no need to design template drawings. Concealed strong and weak electric pipelines and heating pipelines can be directly penetrated from the wall without damaging the wall. The downspout is the component that affects the appearance and is the most easily damaged. The downspout can be directly penetrated from the wall, which is both beautiful and durable without damaging the wall. Multi-energy blocks are both load-bearing and heat-insulating blocks, which are superior to existing load-bearing non-insulation and heat-insulating non-load-bearing blocks. Standardized design and low design cost. Therefore, the design is superior to clay bricks and existing blocks.

4, construction is simple, fast, standardized, and low construction costs:

The construction of multi-energy blocks is simple and conforms to the current construction specifications. There is no need to consider drawing block construction layout drawings, and no bricks or other components are required to make up. The main specifications of the multi-energy block are each equivalent to 23 (or 15, or 11) standard bricks. Of course, the masonry is simple, fast, and low cost; seismic forms, ring beams, lintels, beam pads, etc. can be used without supporting the formwork. Pouring concrete saves time and labor and low costs; concealed installation of strong and weak electrical pipelines, heating pipelines, and downspouts can be directly penetrated from the wall without damaging the wall. Low construction cost; walls made of conventional materials need to be pickled during plastering, which is time-consuming and time-consuming and may not meet the requirements. However, the walls made of multi-functional blocks can be leveled out without going in. Gray saves time and labor, and has low cost; integrated load-bearing and thermal insulation of multi-energy blocks, fewer construction procedures, saving time and labor; and low total construction cost. Therefore, construction is superior to clay bricks and existing blocks.

5. The building is durable, practical, elegant, and low in comprehensive construction cost:

The unit weight of multi-energy blocks is about 1/4 lighter than standard bricks, and lighter than existing blocks to varying degrees. The basic cost of the building is much lower, and the building cost can be increased compared with standard bricks or current blocks. Height; therefore the cost of square meters is much lower for the same geological conditions. The specifications and colors of the multi-energy blocks are very beautiful and generous. In general buildings, there is no need for external decoration, which can save a lot of costs. The multi-energy blocks can bear loads and heat, which can save a lot of heat treatment costs. The mixed structure of the block is seismic, durable and practical. Low comprehensive construction cost. It is an ideal product for building development. Therefore, comprehensive construction is superior to clay bricks and existing blocks.

6. The building is comfortable to live (use), saves money and money, and has low maintenance costs:

The multi-energy building block has good thermal insulation performance, which saves a lot of heating and cooling costs in winter and cool in summer; the room is clean and beautiful, and the bad signal magnetic field disturbance caused by excessive steel reinforcement without steel-reinforced structure weakens and causes bad health Impact, without the shortcomings of brick-concrete structure and poor earthquake resistance, and the harmful effects of the harmful gases produced by additives in other wall materials on people, and even cause diseases. Comfortable living (use), worry-free and money-saving. Therefore the use is better than clay bricks and existing blocks.