Safe Operation Regulations Of Cement Brick Machine

- Dec 09, 2019-

   1. When the cement brick machine is running, strictly put the tools into the drum to avoid accidents.


2. Check the clutch, brake, wire rope, etc. before starting the cement brick machine every time.


3. When using the mixer, it must be placed in a solid place, stabilized with a bracket or a foot tube, and not supported by tires.


4. Note that when the hopper is raised, no one is allowed to pass or stay under the hopper. After the work is completed, the hopper is fixed and left.


5. If oil leakage occurs in hydraulic parts such as oil cylinder, valve block, valve, oil pipe, etc., maintenance methods such as oil seal replacement and seal ring replacement or whole replacement shall be adopted to avoid running with illness. Oil pumps and oil motors must be listened, watched, and touched frequently during operation. If abnormalities are found, they must be stopped and removed.


6. Keep the hydraulic system, oil pipelines and the inside of the hydraulic station clean.


7. Note that the oil temperature is too high, which affects the performance of the machine.


8. When the cement brick machine is overhauled, the hopper should be fixed and the power should be cut off.


9. The vibration time of cement brick machine products should be strictly controlled. Adjust the vibration time according to the product requirements, summarize the better ratio between yield and quality, and adjust the supply amount or the number of times to achieve balance if necessary.