What Are The Characteristics Of The Filter-formed Quality Cement Tile?

- Sep 29, 2019-

1. Unique waterproof structure

Only the bottom structure of the valley can be achieved by the press-molded molded tile, which makes the outflow of rainwater smoother and more rapid, and avoids the phenomenon of backflow of ordinary cement tile rainwater formed by rolling. In addition, the molded part of the tile has a part of the water retaining function, that is, it is used on the horizontal roof, and there is no rainwater backflow phenomenon.

2, high strength

The fine color tile is made by upper and lower molding, the appearance is beautiful and vivid, the surface of the tile is smooth and flat, the size is strict and accurate, the density is uniform, and the flexural strength greater than 200 kg is enough for the construction workers to walk freely on the already laid roof.

3, convenient construction

Whether it is vertical or horizontal construction is convenient and feasible. On the general slope roof, it is not necessary to hang the slats, and it is also convenient to use the cutter to cut the tiles in a wet manner at any angle.

4, superior wind resistance

The molded tile uses the upper and lower sides to bite the slope and the slope to form a tight whole.

5, good insulation and frost resistance

Tests by scientific research departments show that the indoor temperature can be kept stable even in hot summers or cold winters, and its performance is superior to other tile types.

6, resistance to permeability

Because the color tile is molded by large-tonnage press, the compactness is large and the water absorption rate is low. Its anti-penetration performance is much higher than other tile types. In long-term rain and snow areas, there will be no water seepage.