Waterproof material can be laid on the leaking part, or it can be renovated on the roof as you have before. If the tile has been used for many years, you can consider directly changing the tile. It is easy to crack after rainwater is washed out all the year round. It is easy to turn over the tile when it is windy and heavy, and it needs to be renovated and maintained. Therefore, the direct replacement of the tile can solve the problem at one time.
Roof leakage and tile replacement: Synthetic resin tile is a new type of environmentally friendly building material promoted by the state. It has the characteristics of anti-corrosion and heat insulation, waterproof and impermeability, flame retardant, high strength, no cracking, anti-pressure and anti-seismic. Wide width plate design with width of 880mm and 1050mm, the length can be arbitrarily cut according to the needs, the tile material is light, and each person can install about 100 square meters per day. The installation is convenient and quick, and the lap joint reduces the probability of water leakage. The synthetic resin tile does not absorb water, so it does not increase the load-bearing capacity of the beam of the beam due to the large water absorption rate. The tile is fastened with special self-tapping screws and will not slip off. The service life is about 30 years, and there is no need for maintenance during use. Because the surface of the synthetic resin tile is smooth and smooth, the debris will be washed away by rain when it falls on it. It can be used for a long time to extend the service life of the synthetic resin tile.