Why do we need to debug the brick machine? Although the brick machine has made the factory test in the factory according to the relevant regulations, the following inspection should be carried out during the installation of the brick - free brick machine due to long distance transportation and long time placement.
1. Check whether the brick machine is damaged or deformed during transportation (especially the hydraulic pipe).
2. Check whether the fasteners in the main parts of the brick machine are loose.
3. Check the reducer. Whether the oil cylinder of the shaking table and the lubrication points are filled according to the requirements, the oil quantity is appropriate.
4. In addition, it is necessary to make a comprehensive wipe work on the non-burning brick-making machine, and lubricate the relative sliding parts of each moving part before the test machine. If the transportation need to machine apart can be divided into forming device, the plate device, feeding device, a brick device, stacking device, electronic control device, etc., according to the assembly relationship between assembly in place when you install.