Automatic Concrete Cement Brick
Product Description
1. Technical specification of QFT6-15 concrete block, brick, interlock paver, curb stone, slab, wall tile making machine specification
Capacity per mould:6 pcs/mould (Standard Block: 400x200x200mm)
21pcs/mould (Solid Block: 230x110x75mm)
15 pcs/mould (Interlock: 225x112.5x60mm)
21 pcs/mould (Holland Brick: 200x100x60-80mm)
Cycle Time:12-25 seconds
Capacity per shift(8 Hours):Hollow Block (400x200x200mm): 8640pcs
Solid Block (230x110x75mm): 40320pcs
Interlock (225x112.5x60mm): 18000 pcs
Holland Brick (200x100x60-80mm): 24192 pcs
Vibrating Frequency:1500~4100 r/min.
Vibrating Force:60KN
Motors Power:37.5KW
Machine Dimensions:3270X1850X3200MM
Pallet Size:850X680mm
Gross Weight:about 8T
2. Advantages of QFT6-15 block, paver and curb making machine
Vibration table is designed work in high frequency and low amplitude, increase 10% block strength and reduce at least 10db noise.
Automatic Siemens control system and raw material ratio record system increase 20% efficiency
Frequency conversion technology makes each hydraulic cylinder working with changeable speed: high speed in front period and slow down in rear period, which could reduce damage to finished block and machine/
Fault alarm system, saving 30% time in troubleshooting.
Moulds are processed with the procedures of carburizing, nitriding and quenching to make strength to HRC61, and lifespand at least 1,200,000 cycles.
3. Production line preparation:
Labor: 6~8 workers/shift
Electricity consumption: 50kW/hour
Land:3500m2 (800m2workshop,500m2raw materials storage,600m2wet block curing yard,1600m2 finished block storage.)
Guarantee period:12 months after block machine finished installation.
Installation: Qunfeng will send one technician to install machine and train customer's workers.